Item Details
*SOLD AS PAIRS*
The 110 Knuckle is a completely new concept that allows for adjustment, strength, and ease of installation that has never really been seen with knuckles. This can be used with the Z33 350z Hub or standard S-chassis Hub.
The design is capable of running over 65 degrees of lock depending on your setup. Because of the design, we are able to use Tempered Structural Steel with even higher strength characteristics than typical Chromoly such as 4130 and 4140 which is already extremely strong. Also because we don't use the outer arm for strength, there is no issues with worrying about the strength of badly modified or bent knuckles.
Options:
Hubs Supplied - If you'd like us to supply hubs with the knuckles click the box (350z hub option only)
Hub Type - These Knuckles can suit either the 350z Hub or the OE S14/S15 Hub.
Car Model - For this product the main difference between S13 and S14/S15 is which coilovers you plan on running as the coilover mount holes are different sizes. If you are running S14/S15 coilovers in an S13 then select S14/S15.
Knuckle Drop - This option allows you to drop where the Coilover mounts to the Knuckle, this allows the car to run lower ride height without reducing the travel of the coilover however most coilovers are designed for standard mount height and our recommendation is to keep the standard mount location to optimise the performance of the suspension.
Coating - The Black Zinc is less expensive however more prone to marking. The Electroless Nickel is a tougher, brighter coating with more resistance to damage and corrosion
Features:
- Adjustable Ackerman and SAI
- 45mm Roll-centre correction at the bottom pickup
- ABS Provision
- Proven Knuckle Design for high lock and feel
- Easy Installation
- High Tensile Steel Construction (Bisalloy 80)
Adjustment:
- Linear Ackerman (5 way)
- Steering Axis Inclination (4 way - 10 Degrees)
*Off-road use only