Item Details
The 210 Steering kit is designed to provide great feel, big lock, balance and tonnes of controllability to improve the steering performance of your drift car while providing near standard wheel fitment giving a more subtle look, and allowing you to run smaller guards and aggressive wheels. The concept behind this keep is keeping caster angle to utilize the "jacking" effect to allow front wheel slip at large angle to provide balance at big angle.
The lower control arms and caster rod combo provide maximum clearance and on car turnbuckle camber/caster adjustment. The bolt on knuckles allow adjustable geometry and great feel, while delivering the ability to run a lot of lock. Combined with our Tie Rods which allow additional bump steer and ackerman adjustment and bolt-on rack spacers to allow more travel in the rack, this kit has a massive amount of flexibility to suit every style of driving and setup.
Coatings
The 2 choices for coating on the LCA are Black Zinc and Electroless Nickel. The Black Zinc is less expensive however more prone to marking. The Electroless Nickel (show in image) is a tougher, brighter coating.
~Kit Includes~
2x BILLET Lower Control Arms/BLATANT Castor Arms
2x Caster Brackets
2x Tie Rods - 2000 Series
2x BILLET Knuckles
1x Adjustment Spanner
BILLET Lower Control and Caster Arms
- Adjustable LCA Length from 335mm to 400mm
- High-Tensile/Chromoly Turnbuckle adjustment for both Camber and Caster
- Adjustable Rose Joint Spacing
- Adjustable Lock Stops
- Extremely rigid and strong to deal with high loads
- High clearance LCA and Caster rod design, can support up to 70 degrees of lock
- Lockable 2-piece Design
- High Tensile Structural steel main construction 2-piece
- Chromoly PTFE/Kevlar-lined race Rod Ends
- Professionally Tig welded
Caster Brackets
- Rigid Steel Construction to reduce flex
Tie Rods - 210 Series
- 15mm Bump Steer Adjustment
- Ackerman curve adjustment
- 65 Degrees of Misalignment
- Additional Length
- Additional Adjustment
- Quick change design
- Chromoly Construction
- Zinc Plated
BILLET Knuckles
- Adjustable arm length (steering rate)
- 3-way Ackerman Adjustment
- Easy Installation
- High Tensile Steel Construction (Bisalloy 80)
- Zinc Plated
Adjustment Spanners
- Makes adjusting turnbuckles easier
- High Tensile Steel construction
- Zinc Plated
*Off-road use only