S-Chassis - 110 Series Steering System

This kit uses OE Lower Control Arms, ideally lengthened for additional clearance, but able to be run without. This kit utilities our bolt on knuckles, high clearance caster rods and steering rack spacers. It is recommended to add lock stops to suit your application. While fairly basic, this kit is capable of providing huge amounts of lock and tonnes of steering performance.

110, 210 or 310 Series?
110 Series - Based around the 110 Series Knuckle which is designed to work with existing OE infrastructure such as Control Arms, Tie Rods etc. A great entry level kit that provides more than plenty of lock, feel and adjustability.
210 Series - Removing the majority of the OE infrastructure, the 210 Series replaces the Knuckle, Lower Control Arm and Tie Rods which which work with the 210 Series Knuckle that provides more adjustability and quick-changeability for repairs needed. 
310 Series - This kit replaces the fabricated knuckle with a Billet item which provides further adjustment and strength, as well as providing Chromoly Tie Rods designed for higher loads on the joints. This kit is about zero compromises, providing complete customisability, strength and performance. 

Options: 
Car Model - Select the model of car the kit is for
Coating -  The Black Zinc is less expensive however more prone to marking. The Electroless Nickel is a tougher, brighter coating with more resistance to damage and corrosion 
Hub Type - The Knuckles can suit either the 350z Hub or the OE S14/S15 Hub. The 350z hubs are a lot more available and cheaper which is why it's a popular choice. Both are 5/114.3
Hubs Supplied - If you'd like us to supply hubs with the knuckles click the box (350z hub option only)

Kit Includes:
2x High Clearance Caster Rods
2x 25mm Bolt-on Rack Spacers
2x Modular Knuckles

High-Clearance Caster Rods
Bis80 High Tensile Steel Main Construction, Chromoly Threaded Section/Turnbuckle
Teflon/Kevlar Lined Chromoly Race Bearing with 316 Stainless Steel Offset Spacers
Provide an additional ~50mm of clearance over other aftermarket Caster rods for the tyre at lock

Rack Spacers
4140 High Tensile Chromoly Construction
Bright Zinc-Plated for corrosion resistance
20mm Internal Spacing, 6mm Driver's Side and 14mm Passenger side
25mm External Spacing (please select size)

- High Tensile Steel Construction (Bisalloy 80)

*Off-road use only